Features
|
On-board radio gear is quickly accessed through this hatch. It also makes it easy to change LiPo battery packs when equipped with an ElectriFly™ brushless power system.
|
The cowl, wheel pants and landing gear are made of beautiful, lightweight fiberglass, and pre-painted to match the trim scheme.
|
Short, direct aileron linkages deliver strong, accurate control during high- and low-speed flight. |
|
|
|
The “sports car” of sport aerobats — with glow or electric power.
|
|
Click the picture to view video
|
Sleek, contemporary lines make the Revolver a real standout on the flight line. Once airborne, it really takes center stage — regardless of whether it's equipped with a glow engine or brushless motor!
- Only about 10 hours of final assembly are required before your Revolver is flight-ready; quality Top Flite MonoKote film has already been applied.
- Select balsa and ply are used for the fuselage and tail section; the 2-piece wing features a wire cut foam core that is balsa-sheeted.
- Airfoil-shaped tail surfaces allow the Revolver to lock in and track solidly.
- Included in the complete package of quality hardware is a polished aluminum spinner, vacu-formed canopy and pilot figure.
Read what RC Universe has to say about the Revolver.
|
The bolt pattern on the firewall lines up exactly for either a .46-.70 glow engine mount or a motor mount for installing a brushless Outrunner motor such as the ElectriFly™ RimFire™ shown here. |
|
|
|
Specifications |
Wingspan: 59" (1500mm)
Wing Area: 563 sq in (36 sq dm)
Length: 48" (1220mm)
Wing Loading: 25 - 29 oz/sq ft (76 - 88 g/sq dm)
Flying Weight: 6 - 7 lb (2720 - 3180g) |
Requires: Glow Engine Requirements: 2-stroke .46-.55 cu in or 4-stroke .70 cu in
Electric Motor Requirements: 800kV brushless Outrunner motor, 80A brushless ESC, (2) 3200mAh 11.1V LiPo battery packs, 11 x 5.5E prop, large aluminum motor mount
Radio Requirements: 4+ channel radio w/5 servos (50 oz. minimum torque)
|
|
|
Home
Shopping
Your
E-mail Newsletter
Wish